HOLZ-HER
Short term available machines
1020
1030
XL classic
XL power
Available ARTEA 1020:
Technical Specification:
- Edging thickness of coiled edging: 0,4 – 3 mm
- Edging thickness of cut-length edging: 0,4 – 5 mm
- Edging height: max. 55 mm
- Panel thickness: 8 – 50 mm
- Edging cross section: max. 5 x 50 mm (depending on material)
- Workpiece width: min. 70 mm
- Workpiece length: min. 180 / 210 mm
- Feed speed: 9 m/min.
Equipment:
- Edge Control BC 15 – with 15,6″ Touchscreen
- Vi.Se. (VIsual SEtting Modus)
- Pre-milling unit FG101 with 2 diamond cutter heads
- Edge feeder MG101
Automatic transport of coils - Glue application system Glu Jet GJ101 (2,3 kW, 50 Hz)
- Hopper for 1,4 kg glue cartridges (4 cartridges)
- Glu Jet rinse hopper
- Pressure unit DW101
- End trimming unit KA101 (50 mm) pneumatic plunge in
- Multifunctional Trimming unit FR101
- Scraper unit ZK101
- Surface scraper unit FK101
OPTIONAL: available with spraying device.
Available ARTEA 1030:
Technical Specification:
- Edging thickness of coiled edging: 0,4 – 3 mm
- Edging thickness of cut-length edging: 0,4 – 5 mm
- Edging height: max. 55 mm
- Panel thickness: 8 – 50 mm
- Edging cross section: max. 5 x 50 mm (depending on material)
- Workpiece width: min. 70 mm
- Workpiece length: min. 180 / 210 mm
- Feed speed: 9 m/min.
Equipment:
- Edge Control BC 15 – with 15,6″ Touchscreen
- Vi.Se. (VIsual SEtting Modus)
- Pre-milling unit FG101 with 2 diamond cutter heads
- Edge feeder MG101
Automatic transport of coils - Glue application system Glu Jet GJ101 (2,3 kW, 50 Hz)
- Hopper for 1,4 kg glue cartridges (4 cartridges)
- Glu Jet rinse hopper
- Pressure unit DW101
- End trimming unit KA101 (50 mm) pneumatic plunge in
- Multifunctional Trimming unit FR101
- Form Trimming: Corner rounding unit FF101
- Scraper unit ZK101
- Chip collector
- Surface scraper unit FK101
- Buffing unit SW101
OPTIONAL: available with spraying device.
Available STREAMER XL classic:
- 3 - Pcs. available
Technical Specification:
- Edging thickness of coiled edging: 0,4 – 3 mm
- Edging thickness of cut-length edging: 0,4 – 6 mm (FR201)
- Edging thickness of cut-length edging: 0,4 – 8 mm (FR301)
- Edging height: max. 65 mm
- Panel thickness: 8 – 60 mm
- Edging cross section: max. 8 x 42 mm (depending on material)
- Workpiece width: min. 65 mm
- Workpiece length: min. 160
- Feed speed: 10 m/min.
Equipment:
- Edge Control BC 15 – with 15,6″ Touchscreen
- Vi.Se. (VIsual SEtting Modus)
- Pre-milling unit FG201 with 2 cutter units
- Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, left hand
- Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, right hand
- Edge feeder 1903
Automatic transport of coils and single strips - Glue application system Glu Jet GJ301 (2,3 kW, 50 Hz)
- Hopper for 1,4 kg glue cartridges (4 cartridges)
- Glu Jet rinse hopper
- Automatic refill function
- Pressure unit 1912-3 pneumatic
- End trimming unit 1918 (60 mm) pneumatic
- Multifunctional Trimming unit FR201
- Diamond cutter Ø 57 x 17 mm Z = 2, R = 2,0 mm, left hand
- Diamond cutter Ø 57 x 17 mm Z = 2, R = 2,0 mm, right hand
- Form trimming: Corner rounding unit 1832
- Special software package for shelves with rounded faces
- Diamond coated cutter dia. 60 mm x 10 mm, dia. 16 mm,
Z = 3, R = 2 mm with integrated chip removal
- Finishing: Scraper unit ZK301
- Chip collector
- Surface scraper unit 1964
- Buffing unit 1940
OPTIONAL: available with spraying device.
Available STREAMER XL power:
- 3 - Pcs. available
Technical Specification:
- Edging thickness of coiled edging: 0,4 – 3 mm
- Edging thickness of cut-length edging: 0,4 – 6 mm (FR201)
- Edging thickness of cut-length edging: 0,4 – 8 mm (FR301)
- Edging height: max. 65 mm
- Panel thickness: 8 – 60 mm
- Edging cross section: max. 8 x 42 mm (depending on material)
- Workpiece width: min. 65 mm
- Workpiece length: min. 160
- Feed speed: 10 m/min.
Equipment:
- Edge Control BC 15 – with 15,6″ Touchscreen
- Vi.Se. (VIsual SEtting Modus)
- Pre-milling unit FG201 with 2 cutter units
- Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, left hand
- Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, right hand
- Edge feeder 1903
Automatic transport of coils and single strips - Glue application system Glu Jet GJ301 (2,3 kW, 50 Hz)
- Hopper for 1,4 kg glue cartridges (4 cartridges)
- Glu Jet rinse hopper
- Automatic refill function
- Pressure unit 1912-3 pneumatic
- End trimming unit 1918 (60 mm) pneumatic
- Extraction hoods for End trimming unit 1918
- Multifunctional Trimming unit FR301 MOT4
- Diamond cutter Ø 56 x 60 mm Z = 2, R = 2,0 mm, left hand
- Diamond cutter Ø 56 x 60 mm Z = 2, R = 2,0 mm, right hand
- Form trimming: Corner rounding unit 1832
- Special software package for shelves with rounded faces
- Diamond coated cutter dia. 60 mm x 10 mm, dia. 16 mm,
Z = 3, R = 2 mm with integrated chip removal
- Finishing: Scraper unit ZK301 MOT2
- HW inserts for scraper carrier for ZK 301 / ZK 501
- Chip collector
- Surface scraper unit 1964
- Buffing unit 1940
OPTIONAL: available with spraying device.
Reserve your quickly available edgebanding machine.
Intermediate sale reserved, delivery from our production facility in Voitsberg, Graz (AT).
Fields marked with * must be filled out.
HOLZ-HER product portfolio
Edgebanders
CNC Console
CNC Nesting
Vertical CNC
Vertical panel saw
Horizontal panel saw
